An iPhone case with a catapult that can take out candy at any time – GIGAZINE

An iPhone case with a catapult that can take out candy at any time - GIGAZINE
Movies



iPhone 13 Pro / iPhone 13 Pro MaxThe display is covered with a ceramic shield, which is stronger than any smartphone glass. Even with the iPhone 13 Pro, which has such a strong ceramic shield, many people use a case to protect their device. I thought of getting a unique caseYouTuberのMattie BenedettoMade my own “case that can take out candy” for the iPhone 13 Pro Max.

I Invented a Candy Dispensing iPhone Case (iPhone 13 Pro Max!) – YouTube

Benedetto, who used to use the iPhone 12 Pro Max, decided to design the perfect iPhone case based on his experience dropping and breaking the device.


So, first search for iPhone 13 Pro Max dimensions and case model with 3DCG software.


The case is output by the 3D printer. TPU (thermoplastic polyurethane) filament is used for the material of the case. Because TPU filament is flexible, it can be used to create a highly cushioned material in a case that is resistant to droppings.


to outputQIDI TECH 3D Printer X-maxUse.


So the original case is completed. Since it uses TPU filament, you can see that it is flexible enough to bend.


When I connected it to the iPhone 12 Pro Max that I had, the uneven part of the main camera fits snugly.


The depth is designed to fit the iPhone 13 Pro Max.


With this alone, it would just be an iPhone case, so Benedetto said it was a candy…


The idea was to combine the elements of a pinball machine into a single case.

See also  Apple launches new iPad mini in new colors


Therefore, 3DCG software is used to model the parts that connect the pinball machine elements to the case. The blue part is the injection machine, and the white part is the iPhone case that outputs with TPU filament. The large space below the main camera is where the candy is stored, and the injection machine and injection rail are secured to its right.


The candy stock space and ejection rail allow only one candy to pass through.


So I immediately produce the spare parts with a 3D printer.


The output parts are as follows. The blue case is the part that connects the injection machine and the candy stock space.


The following are the parts used for the injection mechanism. The red part is the handle and end of the injection machine that plays the candy. Two springs are provided to prevent the injector handle from entering the case and the springs from moving in and out of the case.


The following are the parts to be placed on the bottom of the candy stock space and the injection rail parts to change the color overall.


So I put adhesive on the parts…


petaris


Then put adhesive on the red parts…


We will also assemble the injection mechanism.


Put a long spring in the case…


There is also a small spring attached to the outside of the case.


Finally, assemble the injection machine part and the case.


It completes.


Confirm that the injection machine part works properly.


When the handle is not pulled, the injection machine closes the hole connecting the candy stock space and the injection rail part, so there’s no need to worry about removing excess candy.

See also  TSMC 3nm 5nm . 15% faster than


final part, acrylic board,growforgeCut with a laser cutter made from


and attached. The bottom of the candy stock space is lined up as shown below…


It can be easily removed. This makes it easy to refill the candy at any time.


So all you have to do is to install iPhone 13 Pro Max.


The iPhone case taking out the candy is complete.


LaterLeedsOrSkittlesAdd candy…


just shoot.


Candy gracefully dances in the sky.


Copy the title and URL of this article

LEAVE A REPLY

Please enter your comment!
Please enter your name here