LibreELEC 10.0.1 (“Matrix”): MedianCenter Switches to Kodi 19.3 for the First Time

LibreELEC 10.0.1 („Matrix“): Mediencenter wechselt erstmals auf Kodi 19.3

LibreELEC 10.0.1, a spin-off from OpenELEC that was discontinued in 2017, combines Media Center Kodi 19.3 (“Matrix”) with the Just Enough operating system (“JOS”) based on Linux. In addition to the classic x86 architecture, affordable single-board computers based on ARM, such as the Raspberry Pi 4, are now better supported.

LibreELEC 10.0.1 Switches To Kodi 19.3 (“Matrix”)

With LibreELEC 9.2.6, developers of the Minimal Linux distribution, whose job it is to provide the Kodi open source media center, only handled their bug fixes and optimizations from LibreELEC 10.0. The release that has just been revealed has switched to Kodi 19.1 or 19.3 (“Matrix”). LibreELEC 10.0.1 can already be downloaded from the official website of the project downloaded Will.

LibreELEC 10.0.1 Kodi 19.3 (

LibreELEC 10.0.1 Makes Kodi 19.3 (“Matrix”) usable on a variety of systems

LibreELEC 10.0.1 Kodi 19.3 (

LibreELEC 10.0.1 Makes Kodi 19.3 (“Matrix”) usable on a variety of systems

official release notes Show improvements specifically for single-board computers from the Raspberry Pi Zero to the Raspberry Pi 4 and open source Media Center List bugs that haven’t been resolved yet.

  • 19.3. tax update to
  • many small package updates
  • Profiles are now usable
  • Powercycling Reforms for CEC
  • NFS servers are discoverable again
  • ASS subtitles not shown properly
  • RPi4 Playback/Kodi’s Lockup Repeat After N Play
  • RPi4 HDMI screen turns off when CPU usage continues to high
  • RPi4 “no signal” after putting TV out of stand in 4kp50/60 mode
  • RPi4 crashes on H264 and H265 playback
  • RPi4 splash not shown on HDMI0 if HDMI1 is connected
Raspberry Pi 0-3:
  • There is no Raspberry Pi 0-3 release for LE10.0. The RPi graphic drivers are still a complete rewrite in progress, with the current development focused on RPi 4.
  • Support for RPi0-1 has been dropped, it is unlikely to return (lack of horsepower for the new graphic stack).
  • The drivers for RPi2 and 3 are not yet complete and stable.
Raspberry Pi 4:
  • hdmi output 4kp30 . till
  • H264 and H265 HW decoding
  • NEW: HDR Output (HDR10 and HLG)
  • New: HD Audio Passthrough (Dolby TrueHD, DTS HD)

LibreELEC 10.0.1 (“Matrix”) – Release Notes

Added to this are the bug fixes and optimizations that came with the release of Kodi 19.3 (“The Matrix”).

System Images for x86 and ARM

Meanwhile, new system images for Raspberry Pi, various mini PCs with Allwinner, Amlogic, NXP and Rockchip type ARM SoCs and x86 architectures with 64bit (x86_64) are available.

“LibreELEC USB-SD Creator” is available for Windows, macOS and Linux. The current LTS kernel serves as the basis for the Linux 5.10 Just Enough operating system, with support until December 2026.

In the future, the makers of LibreELEC intend to use the next version of Media Center Kodi 20.0 (“Nexus”).

Youtube channel “Raspberry TipsDemonstrates the installation of LibreELEC on a Raspberry Pi 4 microcomputer in step-by-step instructions.

very helpful community from LibreELEC-Forum as well as the official one LibreELEC-wiki.

See also  Star Wars: Squadron says no post-launch content, then reveals some


Please enter your comment!
Please enter your name here