There are various platforms to find out what the actual speed of your internet connection is. It has to be clarified that no matter how a certain number of megabytes of service is contracted, the truth is that this speed is not constant: It suffers from variations throughout the day that depend on many factors, such as the number of devices connected.
In this sense, and as noted above, there are many applications and sites that can be used to evaluate connection speeds at different times of the day. Some of the most popular services are Speedtest.net, Speedof.me Hey Fast.com, among others.
In tests conducted, which take less than a minute, you will see upload and download speeds, as well as ping, which is a latency parameter and measures how long it takes for data to move from the server to the test. .. In short, ping measures, in milliseconds, the time it takes for your local connection to connect to a remote computer on an IP network.
How to improve connection quality
Ethernet connection and router location. There are some issues to consider in order to optimize connection quality. The ideal is to connect the device directly to the router. In this way, the best possible speed will be obtained within the service offering, but if it is not possible, and you have to connect via Wi-Fi, then you will have to find that The router is located in an area where the signal is not interrupted. That is: away from walls, metals, water, and appliances. Ideally, it should be in the center of the house and in a high area.
Choose between 2.4 GHz and 5 GHz. Most router’s wifi It works on two bands: a 2.4 GHz band and a 5 GHz band. The 2.4 GHz band has a longer wavelength, which gives it greater range. Anyway, its speed is low. In contrast, the 5 GHz range is shorter, but offers higher speeds. Keeping in mind, choosing the best option according to the requirement of the user.
Repeater. What an repeater does is receive the signal from the router and forward it, which helps it reach certain areas of the home or office (for example, from one floor to another), but with lower quality What would happen to the router if we were closer.
Powerline Technology (PLC). The system uses existing electrical wiring in the home to connect to the network. They are signal amplifiers but not repeaters. The adapters allow you to create a new access point in any electrical outlet and also operate in homes with different electrical stages.
Wifi trap Mesh WiFi, on the other hand, is made up of a router or main station and one or more satellites that interconnect to improve network coverage. The WiFi mesh system performs intelligent management in this sense: it is capable of connecting devices to the best option at the time. In contrast, repeaters do not communicate with each other but only with the router.
In the case of Wi-Fi mesh networks, advanced network management allows better optimization of resources and therefore better results. The same Wi-Fi network, SSID and password are maintained in a satellite system that feeds back to each other to provide the best possible signal according to time and location. This can be very useful for large houses or in which, due to distribution, the signal does not reach all corners correctly.
Freelance twitter maven. Infuriatingly humble coffee aficionado. Amateur gamer. Typical beer fan. Avid music scholar. Alcohol nerd.